|
Dyno
Session Some Things to Keep in Mind A
Dyno Session is a great way to see exactly how well your bike is running.
For $40 we will give you Horsepower, Torque, and Air/Fuel Ratio.
We will even let you know what you could change to get that extra edge or
to improve drivability. Before
scheduling an appointment, be sure the bike is completely operational.
All bolts and fasteners are tight, all gaskets are good, and oil level is
correct. The clutch should also be
either new, or in very good condition. If you haven’t ridden it down the track
or on the street, don’t bother bringing it in.
Test any electrical components you may have added such as a Nitrous Kit,
Fuel Injection Controller, Air/Electric Shifter, and so on before arriving. The bike should have a street or hard compound rear tire mounted and
balanced. A full tank of the type
of fuel you plan on using and a well lubed chain with proper tension.
If you plan on trying different bolt on items, be sure to have all of
your tools necessary for the job.
Custom
Mapping Some Things to Keep in Mind Having
a custom map built for your fuel injected bike is the only way to get the most
performance and street ability. Custom mapping will allow you to get
better fuel economy and yet still provide you with instant throttle response and
top end horsepower. Ryan Schnitz Dyno Service can build a custom map for
your fuel injected motorcycle equipped with a PCIII, PCIIIr, or PCUSB in about 2
hours. PCII's will take a bit longer. Before
scheduling an appointment, be sure the bike is completely operational.
All bolts and fasteners are tight, all gaskets are good, and oil level is
correct. The clutch should also be
either new, or in very good condition. If you haven’t ridden it down the track
or on the street, don’t bother bringing it in. When you arrive, the bike should have a street or hard compound rear tire mounted and balanced. A full tank of the type of fuel you plan on using and a well lubed chain with proper tension. Having the side panels off the bike will also speed the process up and keep the bike cooler.
|
|
233 N 2nd Street - Decatur, IN 46733 - (260)724-0438 |